Trenz Electronic GmbH TEG2000-01-A1I-1A — FPGA module with GateMate A1 from Cologne Chip, 16 MByte QSPI Flash, 4 x 5 cm

TEG2000-01-A1I-1A - FPGA module with GateMate A1 from Cologne Chip, 16 MByte QSPI Flash, 4 x 5 cm

Cologne Chip GateMate CCGM1A1 FPGA, 16 MByte Quad SPI flash, 2 x 100 pin B2B connector, 25 MHz Clock Oscillator, One SerDes lane, 118 Total I/O

Technical Specifications

Key Features

The Trenz Electronic TEG2000-01-A1I-1A is a powerful 4 x 5 cm FPGA module with the cost-effective GateMate A1 form Cologne Chip AG. The module is equipped 16 MByte QSPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections.

The module sets a new standard for low-cost programmable logic devices, providing an affordable yet powerful solution for diverse applications. Trenz Electronic can manufacture and assembly different variants in-house.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

Key Features

• FPGA
  • Device: Cologne Chip GateMate CCGM1A1 FPGA
  • Performance mode: economy (VDD @ 1.0V)
  • Temperature range: industrial (-20°C to 85°C)

• RAM / Storage
  • 16 MByte (128 Mbit) Quad-SPI Flash memory

• On Board
  • 25 MHz Clock Oscillator
  • LEDs (two status LEDs and one user LED)
  • Level Shifters

• Interface
  • Plug-on-Modul with 2 x 100-Pin Razor Beam B2B connector
  • Configuration via Flash on board, USB or JTAG
  • 5 Gb/s SerDes Interface
  • Diverse I/O- and LVDS configurations:
    • 5 banks with 18 I/Os or 9 LVDS pairs each
    • 1 bank (NB) with 12 I/Os or 6 LVDS pairs
    • 1 bank (NA) with 14 I/Os or 6 LVDS pairs
    • 1 bank (SB) with 6 I/Os @ 1.8V and 8 I/Os level shifted @ 3.3V

• Power
  • Supply voltages: either 3.3V or 3.3V and 5V
  • On-board high-efficiency DC-DC converters:
    • 3 A x 1.0 V power rail
    • 3 A x 1.8 V power rail
    • 4 A x 3.3 V power rail

• Dimension
  • 4 x 5 cm
    

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Open-Source Design Flow
Aligned with Trenz Electronic's commitment to open-source, the FPGA Module supports an open-source design flow. This empowers users to customize and optimize their designs for maximum efficiency and innovation.

Scope of Delivery

• 1 x TEG2000-01-A1I-1A Trenz Electronic MPSoC module with Cologne Chip GateMate CCGM1A1 FPGA
• 8 x screws
• 4 x bolts

Additional Information

• Manufacturer's article number: TEG2000-01-A1I-1A
• Homepage Cologne Chip AG
• Samtec LSHM Razor Beam, High-Speed Hermaphroditic Terminal/Socket Strips, regular 4 mm,
  overview, compatibility, mating heights and speed rating: Wiki, mounted on every 4 x 5 cm module of Trenz Electronic
• Cologne article name information
• Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

About Trenz Electronic

Trenz Electronic GmbH (Bielefeld, Germany) designs and manufactures FPGA and SoC modules, carrier boards, starter kits and evaluation platforms based on AMD/Xilinx, Intel/Altera, Microchip, Lattice and Cologne Chip devices. Specifications are sourced from the manufacturer's official product documentation and are subject to change without notice.

Ordering information

Part Number:  TEG2000-01-A1I-1A

Note: Pictures are for reference only; the actual product prevails. For pricing and lead time, please send an inquiry.